The joystick port built into the Ensoniq Soundscape has a known compatibility problem recognizing the GP500 race system (which may affect other sticks). There's nothing we can do but suggest the use of a game card. 

Before calibrating a nonstandard joystick, it is important to select "Control Driven Calibration." 

Make sure you select the correct joystick axis. If the red calibration dot fails to move, it is more than likely that you selected the wrong joystick port. 

Be sure to save the controller file. 

How to Set Up a ThrustMaster T2 

DO NOT USE THE WIN 95 ADAPTER THAT CAME WITH THE WHEEL. THIS IS NOT A WIN 95 GAME. 

From the main menu of Grand Prix 2: 

1) Select "Control Method." 
2) Select "Not Used." 
3) Select "Advanced Menu." 
4) Select "Joystick A Horiz" for Steering Device. 
5) Select "Analog" for Steering Mode. 
6) Select "Joystick B Horiz" for Acceleration Device. 
7) Select "Analog" for Acceleration Mode. 
8) Select "Joystick B Horiz" for Brake Device. 
9) Select "Switched" for Braking Mode. 
10) Select "Control Driven Calibration" for Control Method. 

Do not touch any other settings. You can edit the set name to say "T2" or "TMaster" and then save the file. 

Now calibrate the device, and your T2 should work. 

Or,you can load the File Directly from the CD. 

1.) Select Control Method. 
2.) Choose "Not Used". 
3.) Select "Advanced Menu" 
4.) Click on "Load Control Set" 
5.) Select your CD-ROM drive letter (D,E,F, etc.) 
6.) Click on the "GPFILES" subdirectory. 
7.) Click on "T2.CON" 
8.) Select O.K. 
9.) Select O.K. again 
10.) Select "Calibrate Joystick" 
11.) Calibrate the wheel. 

How to set up a VR Pilot and CH Pedals Configuration 

1) Select "Control Method". 
2) Select "Not Used". 
3) Select "Advanced Menu". 
4) Select " Joystick A Horizontal" for Steering Device 
5) Select "Analog" for Steering Mode 
6) Select "Joystick B Vertical" for Acceleration Device 
7) Select "Switched" for Accelleration Mode 
8) Select "Joystick B Horizontal" for Brake Device 
9) Select "Switched" for Brake Mode 
10) Select "Control Driven Calibration" for Control Method. 

Now Calibrate the device, and your wheel should work. 

How to set up a CH Steering wheel and Pedal Configuration 

1) Select "Control Method" 
2) Select "Not Used" 
3) Select "Advanced Menu" 
4) Select "Joystick A Horizontal" for Steering Device. 
5) Select "Analog" for Steering Mode 
6) Select "Joystick B Vertical" for Acceleration Device 
7) Select Analog" for Acceleration Mode 
8) Select "Joystick B Horizontal" for Braking Device 
9) Select " Switched" for Braking Mode 
10) Select " Control Driven Calibration" under Control Method 

Now calibrate the device, and it should work.